Observed standards from examining existing models.
Texel density is enforced at 200-300px/m.
| Radial size | Overall polycount | Shroud thickness | Shroud bevel | Radial segment counts |
|---|---|---|---|---|
| 0.625m | 24 | |||
| 1.25m | 24 | |||
| 1.875m | <12,000 | 24 | ||
| 2.5m | <16,000 | 24 | ||
| 3.75m | 24 | |||
| 5.0m | 48 | |||
| 7.5m | 48 |
Encompassing all of Nertea’s Post Kerbin Mining Corporation, Near Future Technologies, and CryoEngines mod packs. They are high detail and polycount as far as models go.
Texel density is around 300-400px/m.
| Radial size | Overall polycount | Shroud thickness | Shroud bevel | Radial segment counts |
|---|---|---|---|---|
| 0.625m | <5,000 | ~3cm | 24 | |
| 1.25m | <8,000 | ~6cm | 24 | |
| 1.875m | <12,000 | ~10cm | 24 | |
| 2.5m | <25,000 | ~12cm | ~4cm | 24 |
| 3.75m | <30,000 | ~12cm | ~2×10cm | 24 |
| 5.0m | 48 | |||
| 7.5m | 48 |
| Radial size | Ring thickness | Ring height | Ring truss radius | Ring truss sides |
|---|---|---|---|---|
| 0.625m | 5.5cm | 9.0cm | 1.2cm | 6 |
| 1.25m | 10.0cm | 12.5cm | 2.5cm | 6 |
| 1.875m | 12.5cm | 20.0cm | 3.5cm | 8 |
| 2.5m | 16.0cm | 20.0cm | 3.5cm | 8 |
| 3.75m | 16.0cm | 22.0cm | 4.0cm | 8 |
| Size | Type | Radius | Min. bend radius |
|---|---|---|---|
| X-large | Fuel/ox flow | 7.5cm | 12cm |
| Large | Fuel/ox flow | 5.0cm | 8cm |
| Medium | Fuel/ox flow | 3.0cm | 5cm |
| Small | Hydraulics, preburner fuel/ox | 1.5cm | 3cm |
| Tiny | Hydraulics, cold gas | 1.0cm | 3cm |