Observed standards from examining Nertea’s models.
High detail and polycount as far as models go.
Texel density is around 300-400px/m.
| Radial size | Overall polycount | Shroud thickness | Shroud bevel | Radial segment counts |
|---|---|---|---|---|
| 0.625m | <5,000 | ~3cm | 24 | |
| 1.25m | <8,000 | ~10cm | 24 | |
| 1.875m | <12,000 | ~10cm | 24 | |
| 2.5m | <25,000 | ~12cm | ~4cm | 24 |
| 3.75m | <30,000 | ~12cm | ~2×10cm | 24 |
| 5.0m | 36 | |||
| 7.5m | 36 |
| Radial size | Ring thickness | Ring height | Ring truss radius | Ring truss sides |
|---|---|---|---|---|
| 0.625m | 5.5cm | 9.0cm | 1.2cm | 6 |
| 1.25m | 12.5cm | 12.5cm | 2.5cm | 6 |
| 1.875m | 12.5cm | 20.0cm | 3.5cm | 8 |
| 2.5m | 16.0cm | 20.0cm | 3.5cm | 8 |
| 3.75m | 16.0cm | 22.0cm | 4.0cm | 8 |
| Size | Type | Radius | Min. bend radius |
|---|---|---|---|
| X-large | Fuel/ox flow | 7.5cm | 12cm |
| Large | Fuel/ox flow | 5.0cm | 8cm |
| Medium | Fuel/ox flow | 3.0cm | 5cm |
| Small | Hydraulics, preburner fuel/ox | 1.5cm | 3cm |
| Tiny | Hydraulics, cold gas | 1.0cm | 3cm |